I just get my new Reloop Mixon 4 console. I tested it and found some little problems:
On Djay Pro v1.0.4 for iPad (iPad Air2 64GB iOS 9.3.5)
a. Fader START/STOP (Shift + channel fader up/down) doesn’t work
b. Open sampler view (Shift + SAMPLER button) doesn’t work
c. CF Curve position 1 and 2 have no efect to slope curve - is the same
d. Shift + LOAD 1 and 3 button doesn’t work
On Djay 2 v2.8.4 for iPad (iPad Air2 64GB iOS 9.3.5)
a. CF Curve position 1 and 2 have no efect to slope curve - is the same
b. Open sampler view (Shift + SAMPLER button) doesn’t work
On Djay 2 v2.8.4 for iPhone (iPhone 6S 128GB iOS 10.1.1)
a. Fader START/STOP (Shift + channel fader up/down) doesn’t work
b. Open sampler view (Shift + SAMPLER button) doesn’t work
c. PITCH control moving will cause a waveform freeze
And please, I really miss the Brake function from BeadPad1 console (Shift + JUMP) . Nice day.
Let me know how you get on. If you go to the DJPP community app and Check out Kalo as he has all the init and sysex info that enables the knobs and faders to be 1-1. In other words just how you left them when you restart (they don’t reset) which is so cool and useful.
My experience has been similar with my iPad Pro w/ djay Pro and Reloop Mixon 4.
1-a: I did notice this feature works properly using djay 2.
1-b: Doesn’t work.
1-c: You may need to adjust the cf. There’s a firmware utilities settings document on Reloops site that provides instructions.
1-d: This is only suppose to work on Mac.