# Connect 2 controllers to iPad lightning **URL:** \ **Category:** DJ Hardware\ **Tags:** iOS\ **Created:** [April 23, 2023, 7:29am UTC](https://community.algoriddim.com/t/connect-2-controllers-to-ipad-lightning/20249 "2023-04-23T07:29:52Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Michael\_Wisniewski](https://community.algoriddim.com/letter_avatar_proxy/v4/letter/m/a88e4f/32.png) [@Michael\_Wisniewski](https://community.algoriddim.com/u/Michael_Wisniewski)\ **Post date:** [April 23, 2023, 8:14pm UTC](https://community.algoriddim.com/t/connect-2-controllers-to-ipad-lightning/20249/3 "2023-04-23T20:14:15Z")
Best bet is an official Apple Lightning to USB3 adapter + USB Hub (preferably powered). Plug both controllers into the USB hub. Though as @Slak_Jaw mentioned an MFI certified Lightning adapter is also a good bet. **Tip** : iOS uses the last audio interface that was plugged in. So plug in your DJ controller 1st and then the controller you want to use as the audio interface 2nd. Your 1st DJ controller won’t show up as an audio interface but you can still use it to control djay Pro. **Also @Mister_Tuur had some specific steps in this post** : > [@Precueing using external USB sound cards](https://community.algoriddim.com/t/precueing-using-external-usb-sound-cards/17359/25): > > Cracked it. This sequence works: Start Djay Connect Mixtour Go to [Settings] → [Audio Device Setup] and turn on [Output to iPad Speaker] You should now be able to hear music coming from the iPad Connect additional USB output You should now be able to hear music coming from the secondary output In settings you can see that at this point Djay doesn’t see the outputs on the Mixtour anymore. It will only show your secondary destination. Every other scenario (app restart, USB disconnects, etc.) d… --- _[View the full topic](https://community.algoriddim.com/t/connect-2-controllers-to-ipad-lightning/20249)._