Detailed connection instructions: Numark Mixstream Pro Go

Questions
3

Hi @Emad_Leiman, the best place to start would be to familiarize yourself with the Mixstream Pro Go user manual available on the Numark website along with the djay Pro manual available on the Algoriddim website. I don’t have access to this specific hardware, but after reviewing the user manual myself, I would suggest the following:

  1. Switch the Mixstream Pro Go to Computer Mode:
  • Power on the Mixstream Pro Go.
  • On the Mixstream Pro Go touchscreen:
    1. Tap the Source icon in the toolbar.
    2. Select Computer Mode from the source list.
  • The screen will indicate that the device is in Computer Mode.
  1. Connect the Mixstream Pro Go to Your MacBook:
  • Use the included USB-B to USB-A cable to connect the USB-B socket on the back of the Mixstream to the USB-A socket on your MacBook. If your Mac is USB-C, you’ll need a USB-C hub or a USB-B to USB-C cable.
  1. Open djay Pro:
  • Launch the software on your MacBook.
  1. Enable the Controller:
  • djay Pro should automatically recognize the Mixstream Pro Go. If not:
    • Go to Preferences>Devices in djay Pro.
    • Make sure the Mixstream Pro Go is displayed here.
  1. Load Tracks:
  • Use the controller’s Browse Knob and Load Buttons to navigate and load tracks onto the decks.
  1. Test Functionality:
  • Use the controller’s jog wheels, pads, and faders to ensure full functionality within djay Pro.