RANE 12 mk2 doesn't maintain deck selection

[DJ_A_Diffrance]

Rane 12 mk2’s with Reloop RMX-95.

All four deck selection lights up when loading tracks. Another user noticed that it had something to do with the sync but I haven’t seen if there was a solution.

Same thing here:

rane twelve mk2 little problem

hi guys i had a couple of 12s mk2 and reloop elite mixer . i use them with djay pro ai like a controller (not dvs). My question is about: after choose deck 1 and 2 on the twelve the lights of deck choice after 2 or 3 song lights up all four instead to remain only on for the deck select. i choose rotation 33 gir but when i load next song on deck all the two option light up 33 and 45, btw seems not change the speed but it is a little annoin’… There is a way to solve this problem? perhaps…

[DJ_A_Diffrance]

So I’ve been mixing for a few hours. I switched the decks to cue mode instead of having it on the needle search function and haven’t had the issue yet. When I switched back to needle search mode, glitch began again.

[Slak_Jaw]

Hi @DJ_A_Diffrance, can you please record and share a short video that I can pass onto our hardware team? Thanks!

[DJ_A_Diffrance]

Uploading: IMG_1246.mov…

In my experience the buttons only stick in needle search mode. I mistakenly said cue mode at the end. I have to select deck 4, then deck 2 again. Then, when I load another song, all the decks light up again in needle search mode. Works perfectly in cue mode.

[Slak_Jaw]

Thanks for the video @DJ_A_Diffrance - this is very helpful. I’ll share this with our hardware team to see if they have any suggestions.

[Slak_Jaw]

Hi again @DJ_A_Diffrance, engineering has identified the issue and is working on a fix for an upcoming release (likely 5.3.2). Thanks!

[DJ_A_Diffrance]

Great!
You guys are the greatest!

[Slak_Jaw]

You’re welcome @DJ_A_Diffrance. Thanks for the positive feedback!