Did you try several times?
For me it did not go straight away immediately but now i can say that they work fine…
In facts more you use them better it is, and better they respond…
But maybe in your case it is different…
1 Like
Yes. Did try that for quite a while.
And be aware that I have 3 pads not working properly.
1 Like
Update I have now tested this on my Mac and using Serato dj. The problem must be with the controller as it also happens in Serato dj.
Hi,
I have a brand new Mixon 8 and Brand new iPad Pro. I have made a video of this problem. The hot cues are set to momentary so when I press them and let go, the tractors not play however, the performance pad when I press it it plays the track and continues when I let go and when that happens, the play button doesn’t work every time, this happened when I first connected my Mac to my controller, and then it seemed to clear itself up. I will upload a video to YouTube and put the link here. Thanks
I also had problems with the functioning of the buttons (hot cue 1&5 in particular) on my new Mixon 8. I had to return the brands new controller to the nearest dealer and it is currently being repaired.
Oh OK thanks for telling me. Luckily I can send mine back within a month and just get a brand new one.
1 Like
Hi @Nubium, unfortunately as @DJ_Big_Blender stated this is most likely a hardware issue as some other users have experienced the same thing. In some cases they have been able to fix the “button sticking” themselves with repeated presses.
Hello everyone. I have merged these 3 topics into 1 to keep the discussion organized. Thanks!
Thanks. Mine is back from repair and all seems to work fine now.
Let’s hope it will keep working fine?!
1 Like
Is there a hardware issue with the Mixon8?? I’ve seen various posts here and elsewhere about the pads not working. I have a similar issue. The pads on both the far left (1&5) and also the far right (4&8) aren’t fully responsive. I’ve tried updates and it’s not a software issue as work fine on iOS pad. Given the number of people experiencing this it seems they aren’t up to scratch. Am I going to have the same problem if I downgrade to a buddy or beatpad 2? Might have to switch to pioneer equipment…
Yes, looking at other posts here, it does seem to be a hardware issue.
Easily confirmed by using the unit with alternative DJ software. If it does the same thing, it’s the hardware.
1 Like
Hi @Tom_Procter, I’ve merged your topic with this existing one. Yes, there appears to be a relatively isolated hardware issue with this device. Not all user are reporting issues. I purchased one of the early models and have had no issues myself. Also, the issue is only with the Mixon 8. No issues have been reported with the Buddy or Beatpad 2. I also own a Reloop Ready and it works perfectly. I hope that helps.
I did test this issue with Serrato and it was a hardware issue.
1 Like
I had a very similar issue on pad 1 and 5 on deck 1. I was going to send back. I pressed the pads and rubbed my thumb around the pad and it somehow freed it up like it had adhesive on them or something. Mine is perfect now.
3 Likes
This definately worked for me. Had to use quite a bit of pressure but rotated around the edges and it now works as it should.
Thanks man, saved me so much time! I was about to send the unit back.
BopDJ have been great and happy to take the unit back if the issue arises again
1 Like
Pleased it worked for you.
1 Like
Happy to read that and indeed a bit of pressure but rotated around the edges seems to work.
It looks like if the pad were glued to the metal around…
1 Like
Hi all. I’m on my second Mixon 8 and have this issue , seems to happen after a couple of hours after the controller has warmed up. I’ll play around with pushing the pads are stated above. Seems to be mainly pad 5.
1 Like
Hi there, firmly rub your finger around the pad, around the edges. See if it frees it up.
2 Likes
Jut in case, published on Reloop website:
In single cases, one or more pads can get stuck or slightly shifted during transportation and do not respond as expected. If this occurs, please press and trigger all pads firmly and repeatedly, and gently rub the pad section to ensure all pads sit correctly in their place and the contact sensors are reset. This simple procedure solves any response issue.
1 Like
