DDJ-FLX10 Compatibility

DJ Hardware
, , , ,
343

Hi,
I’m using djay Pro version 5.3.2815.0 on Windows 11 with the Pioneer DDJ-FLX10 controller. The internal crossfader in djay (with the mouse or keyboard) works perfectly – it smoothly mixes tracks in sync and key. However, the physical crossfader on the FLX10 has no effect in djay Pro.

I’ve confirmed the following:

  • The crossfader works correctly in rekordbox, so it’s not a hardware issue.
  • In djay Pro, I checked that “Crossfader FX” was enabled under Settings > General. After disabling it, I expected the hardware crossfader to work, but it still doesn’t respond.
  • Channels on the controller are properly assigned to CF A and CF B (not THRU).
  • djay Pro recognizes the DDJ-FLX10 as a MIDI device, but the crossfader does not seem to be mapped.

Could you please help me get the crossfader working with djay Pro? Is there a preset mapping available or should I manually configure it?

Thanks in advance!

344

Hi @krisor,

  1. Can you please confirm in the MIDI Devices settings that you are using the (built-in) MIDI mapping for the FLX10 and not a custom edit?
  2. In the Audio Devices settings, please ensure that the Mixer Mode is set to Internal not External.
345

sorry to ask this here im in a panic and cant find anything on the web. I have new FLX 10 . on channel 1 I am using the line in and the trim is up full but the level is so quiet, any ideas what I can do ? the iPad is up full. thanks

346

@Nubium
Look into the Settings under sound and than headroom. Make sure it is at -6 like mine.

IMG_2975
IMG_29751125×2436 306 KB

347

Sorry I didn’t explain well. This is nothing to do with the app. This is just to do with the controller. I’m using the lining on channel 3 and the level is stupidly low when I’m plugging a phone in and I have a trim up full again nothing to do with the app

348

I just connected my iPhone to line and turned it up really loud, to maximum, and I think that’s a decent volume, which is then played back through the controller.

1 Like
349

@Nubium, try a different cable and adapter and make sure to turn up the physical volume controls on the side of your iPad.

350

Please also check if your phone has a loudness limitation in the settings

1 Like
351

Thanks for doing that. But it never gets really high does it as in you can’t peek it out into the red if you wanted. Not that I would want to.

352

Then please make a video of your setup and how you set it up and also show what is stored in the settings on your iPhone.

Maybe then we can help you better.

1 Like
353

Sound like you use the phono channel? Possible?

1 Like
354

Today with firmware 1.14 on Mac jog wheel display is officially supported. any chance for iOS version ?

355

Hello everyone, we are happy to report that the 5.4 update for macOS and Windows brings jog wheel screen support.

  • Official support for the Pioneer DJ DDJ-FLX10 controller with full on-jog screen integration, developed in collaboration with AlphaTheta (macOS, Windows)

NOTE: I spoke with engineering, and unfortunately jog wheel screens cannot be supported on iOS devices because this implementation requires HID which is not supported on iOS.

4 Likes
356

Can someone with both iOS and Mac share the differences with the mapping. Obviously the screens but since pioneer have officially integrated the flx 10 with Mac/windows I wanna know if iOS is now different in how it’s mapped etc.

358

Question. With the flx10 on iOS when you press shift and cue there appears to be no LED visual to let you know that neural mix EQ is activated. Is this normal behaviour? Could the devs look at a visual?

360

Hi @Dysfunk_DJ, this should be fixed in an upcoming update (likely 5.4.2). Thanks!

1 Like
361

Amazing. Thank you awesome team

2 Likes
362

You’re welcome @Dysfunk_DJ

363

Hi! Are Jog Wheel Colors going to be supported soon on MacOS?

364

How do you mean the green, blue and red jog lights? If so thats already in 5.4 on Mac