DDJ-FLX4 MIDI Map (Unofficial)

Thanks for confirming it should work. Will play around with cable/charger combos.

1 Like

Hey folks,

Writing to share how wonderful we think the fact that everyone of you has contributed to this conversation is :slight_smile:

It’s awesome to see how you’ve helped and supported each other on this occasion (and not only on this one).

Also writing to confirm that, while we can’t share a timetable for this development, we will keep you updated on any related news as we keep working to provide full support for the FLX4 :100:



Fastest way is to use PAD FX1 (mapped to Instant FX).

  • Pad 2 = Echo Out+ (though this changes if you pick a different set of Instant FX)

OR use the BEAT FX section:

  • Select the target Deck (1 or 2).
  • Set FX1 to Echo Out+.
  • Press the ON/OFF button to activate.

OR The SMART CFX button toggles FX2+FX3 On/Off. So you could manually set those FX ahead of time and activate them together as a chained FX. Please note this toggles FX2+FX3 on both Decks.

  • [SHIFT] + SMART CFX toggles the deck Tools, so you can change FX there.
1 Like

This is so helpful, thanks for replying.
Also thanks once again for taking the time to get the mapping working. I had a little peek into the mapping settings and can appreciate how much time and effort it must have taken you. Huge kudos.

1 Like

NEWEST (MIDI MAP 2.7) Jog Wheel Fine-Tune
DDJ-FLX4 (Unofficial2.7).djayMidiMapping (76.1 KB)

NEWEST (MIDI MAP 2.8) Volume LEDs Activated
DDJ-FLX4 (Unofficial2.8).djayMidiMapping (76.9 KB)


Congratulations on your Mapping work. Thanks again.

1 Like

Thanks for this! my 200 kept glitching out and i loaded this up and tried it with my new FLX 4 usb c to usb c On Ipad pro 12.9 M2 wired and it seems to be working pretty good! with the exception of the jog wheel to select songs sometimes not working unless its on a playlist. Other than that so far amazing work! Thank you


This is beyond fantastic. iPad wouldn’t download the file but it was a breeze downloading on Mac and airdropping to iPad and voila- FLX4 magically mapped!! the only thing I will change is mapping neural mix to the EQ keys. I love dJay stems and use them a lot but it’s not enjoyable sliding crossfaders on a glass screen. Im a backyard party, BD party DJ (not for hire) and use iPad overlayed with iPhone running the app plugged into a small mixer board for my own custom samples only. Helluva job mate, very grateful. No need to return the flx4 now which only arrived today. This is more than enough till it’s officially mapped. :+1: :+1: :+1: :+1: :+1:

1 Like

I got mine today and downloaded the mapping from this thread. my iPad is connected to the source usbc port, while the other usbc port is connected to my anker 65W charger and my iPad is being charged so yes it does support pass through charging

1 Like

Lightning quick observations after an hour playing with the unit and the mapping from the DDJ-400 (thanks @Michael_Wisniewski )

  1. Smart fader does activate auto mix but I would never use it live with this version. So far it does not activate any filters during cross fading, unlike the lowly DDJ200 which has a decent Transition FX button that even activates phase sync. Much worse though, it only maintains beat sync during crossfading if Looper packs are activated. this is fatal for me because I use beat sync more than 50% of the time, and I use looper instruments heavily as well; however I have to disengage loopers if the upcoming song was not created digitally (like old reggae) since they don’t sync well, and smart crossfade would then change the speeded up tempo of the next song to its native beat. So I can’t use this feature if this is the way it performs.

  2. Smart CFX is garbled not sure what effect it is producing in dJay. I switched to Rekordbox to test it out and even there I couldnt get it to cycle effects. I’ll have to go look at a YouTube video maybe I’m doing it wrong, because even in Rekordbox I can’t get FX Select to work. Most likely I’m doing it wrong since I haven’t seen a review yet of features

  3. [quote=“Michael_Wisniewski, post:1, topic:19170”]
    [SHIFT]+ON/OFF toggles the EQ knobs between EQ and Neural Mix (on the selected Deck).
    Im unable to make this work

1 Like

The Smart CFX button is mapped to toggle FX2&3 (Manual), so whatever FX2&3 are set to is what you’re hearing. Manually set FX2 and FX3 to get the effect you want.

In hindsight, a more useful mapping for the Smart CFX button might be to toggle Neural Mix on the EQ knobs.

1 Like

Make sure you’re using version 2.8 of the MIDI mapping

  1. In the BEAT FX section, select Deck 1 or Deck 2 (option 1&2 doesn’t work)
  2. [SHIFT] + ON/OFF button will toggle the Neural Mix on the EQ of the selected Deck. You should see visual feedback on the screen.

EQ Hi = Vocals
EQ Mid = Harmonics
EQ Low = Drums

Oops was using v2.5 thanks lol didn’t read the whole thread. Thanks for the quick response, that’s capital!

Unfortunately, I ran out of edits on the 1st post, so I have to post the newest updates further down the thread. All comments are welcome to further re-fine the mapping.

NEWEST (MIDI MAP 2.8 ) Volume LEDs Activated
DDJ-FLX4 (Unofficial2.8).djayMidiMapping (76.9 KB)


  1. Download the MIDI Map file
    a. In macOS put the MIDI Map file in this folder - Music/djay/MIDI Mappings
    b. In iOS use the Files app and tap the MIDI Map file. Tap OK when it asks to import the file. The MIDI Map will be copied to the djay folder on the iOS device.
  2. For general sanity, re-start the hardware, then re-start djay Pro.
1 Like

Ok so the toggle function is revealed in mapping but it doesn’t actually switch to neural mix after engaging toggle. I just went ahead and remapped the EQ to neural knobs anyway cuz I used stems far more than the EQ. Cuz we do a lot of karaoke I run sound through my own mixer board so EQ can be fine tuned there as well.


Algoriddim released the 4.1.7 update today with official support for the FLX4.

1 Like

The official release doesn’t seem as comprehensive as Michael’s mapping.
Smart CFX and Smart Fader do absolutely nothing (as far as I can tell) - other then light the buttons up (someone please correct me on this!)
Also, I like how Michael mapped the FX button - I find I use this an awful lot to echo/reverb out - again, when this is pressed with the official release it doesn’t seem to do anything.
I’m going back to Michael’s version as it’s tried & trusted for me and has served me very well for months!


It doesn’t work the same way as with Rekordbox, but Smart CFX and Smart Fader do something: DDJ-FLX4 & Djay Pro AI - #111 by Chris_R
And the FX button is not functionless either, it activates FX 1.
Nevertheless, of course @Michael_Wisniewski has done a very good job with his mapping! :+1:


This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.