Reloop Mixon 8 - Ultimate STEMS Mapping

[Slak_Jaw]

@athanlive you need to use the FX buttons in combination with the FX Paddles.

1. Select which of the 3 FX you want to use by pressing the button. You can also use multiple FX at once.
2. Enable the FX on the desired Channel/Deck by flipping the FX Paddle Up or Down.

[Slak_Jaw]

@athanlive also, make sure you install the latest Mixon 8 firmware from Reloop and the latest version of djay. The original release had the FX assignments mixed up for Decks 1/3 and Decks 2/4.

[athanlive]

Thank you! Finally working!

[Slak_Jaw]

@athanlive you’re welcome. Glad that worked for you.

[Dysfunk_DJ]

Got my.Mixon 8 mapping wish list
Mixon 8

Rotate source select

Fx next fx prev

Stems split acapella instrumental

Instant doubles

Neural eq

Stems effects on pads so on vocal stem bottom pad echo out. Similar to serato.

Zoom in zoom out

Push preview and preview rev and fwd

Shift and filter instrumental into acapella?

[Slak_Jaw]

@Dysfunk_DJ nice! Good luck with your MIDI Mapping. Should be possible to make all of that happen. Just be aware that you if you set up the Instant FX Pads for STEMS/Neural Mix, you need to manually change the FX assignments back to normal via the touch screen. This is why I don’t use STEMS performance pads. I prefer to use Instant FX in a different way.

MIDI Mappable Instant FX Selection

Algoriddim, please add the ability to MIDI map the FX Selection of specific Instant FXs. Currently, it’s only possible to MIDI map Instant FX1 thru FX8 to the performance pads. Then the selection of the specific Instant FX has to be done through the djay UI edit menus. Basically you have to set these 8 FX and leave them. If we had the ability to map the specific FX Selections (ex. Vocal-Echo Out 3/4, Hands Up, Drum-Fill), then we could use more than 8 pads and have more than 8 different Instant…

[Slak_Jaw]

@Dysfunk_DJ check out my STEMS mapping for the Midi Fighter Spectra. This should give you everything you need to set up the Performance Pads like Serato STEMS.

DJ TechTools Midi Fighter Spectra - Neural Mix / Serato STEMs Mapping

This is my answer to all the hype surrounding the new Serato STEMs implementation. Banks 3 and 4 use a combination of Instant FX and Neural Mix to achieve a similar result to what Serato is doing. The mapping files are stored on DJ TechTools mapping site: DJ TechTools - MidiFighter Spectra-Djay-Neural Mix Please make sure to import the Midi Fighter Utility file included in the ZIP file so the side buttons and LEDs work properly. Most buttons have a Shift layer and are shown in Orange in the m…

[Dysfunk_DJ]

Hi there. FX 1 next just scrolls through favourites. Not sure if this is a djay bug? If no effects in favourites I experienced a crash.

[Dysfunk_DJ]

Other than that very good indeed. I couldn’t work out how to do the deck split thing.

[Slak_Jaw]

@Dysfunk_DJ is it the FX1 Knob or FX1 Button that scrolls through FX Favourites for you?

[Dysfunk_DJ]

Button or it might be both. I’ve put unit away now. I’ll check this week.

[Slak_Jaw]

Well it doesn’t do that on my unit, so perhaps there’s something wrong with your mapping? It’s possible that you have a duplicate of those controls also mapped to FX 1 Select Next or Select Previous.

[Dysfunk_DJ]

Have you got to delete the old one before you re do?

[Dysfunk_DJ]

Only error was on fx1 not fx2 that works fine. Very strange.

[Slak_Jaw]

Yeah, best to delete the old one first, but it should also work to overwrite it will a new MIDI command.

[Dysfunk_DJ]

I thought that too it would be a new midi command.

[Slak_Jaw]

VERSION 4.1 UPDATE: Added STEMs Pad Mode

1. I replaced the Bounce Loops Performance Pad Mode with STEMS.
   a. This is pretty similar to Serato’s implementation with STEMS Mute Buttons on the Top Row and Instant FX on the bottom row.
   b. You will need to edit the Instant FX assignments manually in djay to the desired STEMS FX. I prefer Drum Fill, Drum Echo 1/4, Vocal Juggler and Vocal Echo 3/4 myself.
   c. SHIFT+STEMS Mute will perform a STEMS Solo while the button is HELD down.
2. I moved the Auto BPM Transition / Automix to SHIFT+Play/Pause. For me this placement feels more natural.
   a. So, if you’re playing a track on Deck 1 and want to Auto BPM Transition over to Deck 2, simply press SHIFT+ Play/Pause on Deck 2. The same works in reverse.
3. I replaced Silent Cue with Tempo Reset since I never use Silent Cue.
4. I added FX Select Previous and FX Select Next buttons to the SHIFT+ layer of Instant FX Pad Mode
5. As before, the Orange & Green Text in the Mapping Key represents the SHIFT + Functions.

Reloop Mixon 8 Pro SJ4.1(STEM Pads).djayMidiMapping (324.6 KB)

[Dysfunk_DJ]

Blimey your good. I’ll check this out this morning.

How do I get access to the mic? I think on your mapping we can safely say we have suffient stems control

[Dysfunk_DJ]

Awesome mapping man. So good. Or if you can show me to shift mic or shift acapella or instrumental.

[Dysfunk_DJ]

I’ve done my own edit using your mapping but not adding it all. One thing I would love to add is split stem, that will be cool to add to my work flow. I’ve added instant fx on stems which is very cool for deck A and B.